A Quick Guide to Lighting in A Warehouse

When planning or improving the lighting in your factory, there are numerous aspects to consider. There are so many that the endeavour may appear onerous, but it does not have to be. We’re here to assist you with everything from the most fundamental selection of which source of light to utilize to the more difficult decision of that which light distribution type is ideal.

What Kind of Lighting Should You Use?

When it comes to warehousing lighting, there are 3 options: high intensity discharge (HID), LED and fluorescent, each with its own set of advantages and disadvantages. For a long time, HID bulbs were assumed to be the sole option for lighting warehouses, and they are still widely utilized today. The starting cost of this lamp is the cheapest.

They do, nevertheless, have the fastest rate of Lumen degradation or do not have many colour temperature possibilities. The colour temperature of high-pressure sodium lamps is around 2200K to 2400K, which is quite yellow in colour.

Metal halide lamps have a colour temperature of roughly 4000K to 4500K, which is substantially whiter. All HID system includes a warm-up period until reaching full illumination, as well as a cool-down time before they can be switched on again after being turned off. As a result, power surges are possible.

Fluorescent lighting can be a cost-effective option to HID lighting for individuals on a low budget who still desire a more energy-efficient option. Fluorescent lighting uses less energy than HID lighting. They come in a wider spectrum of colour temperatures, ranging from 2700K to 6500K, as well as sizes and forms, giving you a lot more options when it comes to illuminating your room.

Fluorescents have a low operating temperature, which is a disadvantage. They don’t work well in extremely cold or hot environments. As a result, warehouses that are extremely cold or hot can shorten the fluorescents’ lifespan. Their life expectancy can also be shortened by frequent on/off cycles; hence they are not advised for situations where the lights are turned on and off frequently.

LED light lights are the most adaptable and energy efficient option for warehouse lights. They utilize less energy than just about any other light source while delivering Lumen outputs that are equivalent, if not superior. LEDs are available as standalone lights for new construction or as retrofits for existing fixtures. They could also last up to 100,000 life hours, which means you won’t have to get out the lift or ladder¬†nearly as often to change a bulb, and they don’t have the incessant on/off cycles like HIDs and fluorescents have.

LEDs can be affected by warmer temperatures, even if they perform well in cooler temperatures. However, before temperatures of roughly 80 degrees Fahrenheit, the reduction in light output and life hours is frequently minimal.

What Else Is Needed?

Vacancy and occupancy sensors might be your greatest friend when it comes to lighting vast places like warehouses. Without requiring a substantial upgrade, adding a few of these motion detector types to your lighting system can cut the cost of waste heat by up to 30%. Based on whether or not someone is there, these detectors switch the lights on or off. Whenever you want the lighting to turn on and off regularly, use motion detectors.

Vacancy sensors are designed for situations where the lights don’t need to switch on every time someone walks in, such as warehouses with enormous skylights, and yet you still want them to turn off when the area is vacant.

Leave Comment

Your email address will not be published. Required fields are marked *